Hypex NC2k Monoblock
Orders typically ship within 14 days
All amplifiers are individually assembled and tested to ensure the highest quality and performance.
$1,195.00Buy Now
Power
- 2000 watts @ 2 ohm
- 2500 watts @ 4 ohm
- 1600 watts @ 8 ohm
- (per channel, 1kHz, 1% THD)
Fidelity
- S/N: 133dB
- FR: 0 - 50KHz
- THD: 0.002% (1250W, 4Ω, 20Hz-20kHz)
Free US Shipping
International customers please contact us before ordering.
We are excited to finally add the Hypex NC2k to our lineup! Based on the original tried and true NCORE technology, the NC2k offers staggering amounts of power at very low distortion and noise floor. With up to 2500w of total power and 48A of output current, the NC2k can drive ANY speaker a customer wants to pair with it.
With its completely flat frequency response and ultra high-power output, a pair of our mono Hypex NC2k's are a top tier choice for those with critical 2ch listening setups that utilize even the most difficult to drive speakers, allowing for users to hear the source material as it should be without any added distortion or "coloring" of the sound.
You have a choice of our Buckeye gain stage or bypassing the gain stage completely (both are the same price and both sound identical):
With its completely flat frequency response and ultra high-power output, a pair of our mono Hypex NC2k's are a top tier choice for those with critical 2ch listening setups that utilize even the most difficult to drive speakers, allowing for users to hear the source material as it should be without any added distortion or "coloring" of the sound.
You have a choice of our Buckeye gain stage or bypassing the gain stage completely (both are the same price and both sound identical):
- Gain bypass, which renders our Low/Med/High toggle switch inactive (gain cannot be changed). This configuration will have the lowest distortion/noise floor but requires a source capable of delivery high preout voltages (up to 10v)
- Buckeye gain stage, allowing for Low/Med/High gain settings via toggle switch on the rear. This configuration is best for nearly all customers, especially those pairing with AVR's or low preout voltage sources.
Custom I/O Board:
- Neutrik XLR connectors
- Gold plated 5-way speaker binding posts
- Low, Med, High Gain settings (if using our Buckeye gain stage)
- TI OPA1656 OP Amp
- TI TPS7A30/49 Voltage Regulators
- Auto Sensing On/Off
- 12v trigger On/Off
- Muted soft-start/shutdown (minimizes speaker “pop” when turning on and off)
- Clipping Indication (via front power LED)
- Error Indication (via front power LED)
Gain settings when using our Buckeye gain stage:
RCA vs. XLR
While our amplifiers use XLR inputs, it is perfectly fine (and fully supported by Hypex) for customers to use RCA to XLR cables to connect the amplifier to a source that only has RCA outputs.
Please see our FAQ section for more information if necessary.
- 4 ohm - 31dB/2.8Vrms (High), 26dB/5.0Vrms (Medium), 21dB/8.8Vrms (Low)
- 8 ohm - 31dB/3.1Vrms (High), 26dB/5.6Vrms (Medium), 21dB/10.0Vrms (Low)
- 4 ohm - 20dB/9.5Vrms
- 8 ohm - 20dB/10.7Vrms
RCA vs. XLR
While our amplifiers use XLR inputs, it is perfectly fine (and fully supported by Hypex) for customers to use RCA to XLR cables to connect the amplifier to a source that only has RCA outputs.
Please see our FAQ section for more information if necessary.
Specifications:
- (1) Hypex NC2k Module
- (1) Hypex SMPS3kA700
- Ultra High Damping Factor
- Ultra High 48A Current Output
- Power Efficiency = 93%
- All aluminum case w/black powder coat finish
- 10" wide x 13.5" deep x 3.5" high, 8lbs
Our cases may not be much to look at, but unlike our competitors who use overseas manufacturing, we have all of our cases manufactured in Nova Scotia, Canada (Protocase, Inc). This is part of our commitment to keep as much of our amplifiers as "home grown" as possible. It also ensures the highest possible quality aluminum and extremely precise CNC manufacturing.
Options:
- See our case options for case upgrades.
- See our connector options for connector upgrades.