PURIFI 1ET7040SA Monoblock, v2 w/Capacitor PCB board
Backorder (ETA 3-4wks)
All amplifiers are individually assembled and tested to ensure the highest quality and performance.
$850.00Buy Now
Power
- 950 watts @ 2 ohm
- 500 watts @ 4 ohm
- 250 watts @ 8 ohm
- (per channel, 1kHz, 1% THD)
Fidelity
- S/N: 129dB
- FR: 0 - 60KHz
- THD: 0.0008% (200W, 4Ω, 20Hz-20kHz)
Free US Shipping
International customers please contact us before ordering.
CLOSEOUT SALE:
With the release of the Purifi Gen 2 offerings (the 1ET9040BA and the 1ET6525SA), we are discontinuing our 1ET7040SA monoblock offering. In doing so, we are having a closeout sale on our remaining Purifi 1ET7040SA monoblocks. The sale price INCLUDES the upgraded Micro Audio SMPS1k-PFCR2 power supply (which allows the 7040SA monoblock to reach full rated output power compared to our competitors) AND we are also including the Micro Audio Capacitor PCB Board upgrade (4x10000uF).
The Purifi 1ET7040SA is the big brother of the highly regarded 1ET400A. While the 4 and 8 ohm output is nearly identical to the Purifi 1ET400A, the 1ET7040SA shines for those with sub 4 ohm speaker loads (40A peak current capability vs. 25A peak of the 1ET400A). The Purifi 1ET7040SA is capable of up to 950w of power while maintaining extremely low distortion and noise floor levels.
With its completely flat frequency response and ultra high-power output, a pair of our Purifi 1ET7040SA's are a top tier choice for those with critical 2ch listening setups that utilize extremely hard to drive speakers, allowing for users to hear the source material as it should be without any added distortion or "coloring" of the sound.
With the release of the Purifi Gen 2 offerings (the 1ET9040BA and the 1ET6525SA), we are discontinuing our 1ET7040SA monoblock offering. In doing so, we are having a closeout sale on our remaining Purifi 1ET7040SA monoblocks. The sale price INCLUDES the upgraded Micro Audio SMPS1k-PFCR2 power supply (which allows the 7040SA monoblock to reach full rated output power compared to our competitors) AND we are also including the Micro Audio Capacitor PCB Board upgrade (4x10000uF).
The Purifi 1ET7040SA is the big brother of the highly regarded 1ET400A. While the 4 and 8 ohm output is nearly identical to the Purifi 1ET400A, the 1ET7040SA shines for those with sub 4 ohm speaker loads (40A peak current capability vs. 25A peak of the 1ET400A). The Purifi 1ET7040SA is capable of up to 950w of power while maintaining extremely low distortion and noise floor levels.
With its completely flat frequency response and ultra high-power output, a pair of our Purifi 1ET7040SA's are a top tier choice for those with critical 2ch listening setups that utilize extremely hard to drive speakers, allowing for users to hear the source material as it should be without any added distortion or "coloring" of the sound.
Custom I/O Board:
- Neutrik XLR connectors
- Gold plated 5-way speaker binding posts
- Low, Med, High Gain settings
- TI OPA1612 OP Amp
- TI TPS7A30/49 Voltage Regulators
- Auto Sensing On/Off
- 12v trigger On/Off
- Muted soft-start/shutdown (minimizes speaker “pop” when turning on and off)
- Clipping Indication (via front power LED)
- Error Indication (via front power LED)
Gain Settings
RCA vs. XLR
While our amplifiers use XLR inputs, it is perfectly fine (and fully supported by Purifi) for customers to use RCA to XLR cables to connect the amplifier to a source that only has RCA outputs.
Please see our FAQ section for more information if necessary.
- 4 ohm - 25.5dB/2.4Vrms (High), 20.5dB/4.2Vrms (Medium), 15.5dB/7.5Vrms (Low)
- 8 ohm - 25.5dB/2.4Vrms (High), 20.5dB/4.2Vrms (Medium), 15.5dB/7.5Vrms (Low)
RCA vs. XLR
While our amplifiers use XLR inputs, it is perfectly fine (and fully supported by Purifi) for customers to use RCA to XLR cables to connect the amplifier to a source that only has RCA outputs.
Please see our FAQ section for more information if necessary.
Specifications:
- (1) Purifi 1ET7040SA module
- (1) Micro Audio SMPS1K-PFCR2
- High Input Impedance: 51K
- Ultra High Damping Factor
- Ultra High 40A Output Current
- Power Efficiency = 94%
- All aluminum case w/black powder coat finish
- 10" wide x 13.5" deep x 3.5" high, 8lbs
Our cases may not be much to look at, but unlike our competitors who use overseas manufacturing, we have all of our cases manufactured in Nova Scotia, Canada (Protocase, Inc). This is part of our commitment to keep as much of our amplifiers as "home grown" as possible. It also ensures the highest possible quality aluminum and extremely precise CNC manufacturing.
Options:
- See our case options for case upgrades.
- See our connector options for connector upgrades.